Changes between Version 6 and Version 7 of Maschinen/LaserCutterHowto


Ignore:
Timestamp:
Jul 2, 2011, 8:37:04 AM (13 years ago)
Author:
gismo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Maschinen/LaserCutterHowto

    v6 v7  
    44
    55== Boot the Lazor ==
    6  * Apply Safty Glasses
     6 * Apply Safety Glasses
    77 * Power up Water Pump
    88 * Power up Ventilation
    9  * Turn Lazor Power down (Carves regulation to CCW)
    10  * Turn on the Lasor (check power cord, flip "End Switch")
     9 * Turn Laser Power down (Carves regulation to CCW)
     10 * Turn on the Laser (check power cord, flip "End Switch")
    1111 * Check Ventilation and Water Pump
    1212
     
    1919== Before Fire ==
    2020 * check Machine Settings - Prefs. may have changed by another user.
    21  * Dobble check 'Move Frame' or 'Move Rect' before fire!
     21 * Double check 'Move Frame' or 'Move Rect' before fire!
    2222 * DON'T USE ''''DRAW FRAME'''' or ''''DRAW RECT'''' (buggy)
    2323 * Shout "Fire the Lazor!" when ready
     
    2626
    2727 * Normal Parameter Cut Mode
    28   * Lazor Power (min/max): '''0.1A - 0.6A'''
     28  * Laser Power (min/max): '''0.1A - 0.6A'''
    2929  * Travel Speed (min/max): '''10 mm/s - 60 mm/s'''
    3030
    3131 * Military Power (extra cost, ask)
    32   * Lazor Power: '''1.2A'''
     32  * Laser Power: '''1.2A'''
    3333  * Slow speeds: < 10 mm/s
    3434
    3535 * Write down Job runtime.
    3636
    37 == During Fire ==
     37== During Operation ==
    3838 * If you see flames, somethings wrong! (add more Fan power or stop Process)
    39  * Don't look into plasma! (this is what you see glowing)
    40  * Don't look the into beam with remaining eye
    41  * When Job is done, keep Lid closed for a few more seconds.
     39 * Don't look into the plasma! (this is what you see glowing)
     40 * When Job is done, keep Lid closed for a few more seconds for ventilation.